The 3 Best Variable Speed Pool Pumps To Buy in 2019

best variable speed pool pump

How to pick a Variable Speed Pool Pump

One of the most important components of any pool – above ground or inground – is the pump itself that works to circulate water, keeping everything fresh and not allowing the water to stagnate the way it would have if left uncirculated.

Unfortunately, for one reason or another, many of the pumps that come with pool set ups are nowhere near as effective as they could be or as they should be. Some of them have obviously been designed to offer the lowest level of performance possible just to get the pool out the door and installed, and others are using old technology that is nowhere near as effective or as efficient as today’s top solutions are.

Thankfully though, with a relatively small investment, you can get your hands on one of the best variable speed pool pumps available right now and dramatically improve not only the quality of your swimming pool but also cut down significantly on the amount of time you spend cleaning and maintaining it.

Below we highlight our three favorite variable speed pool pumps, three of the top options on the market today and three options that you can’t go wrong with!

1.Hayward SP2610X15 Pool Pump

This variable speed pool pump is widely considered to be the very best pool pump on the planet, the industry-standard – the gold standard, at that – for more than 20 years and a quality piece of technology you’ll be able to rely on for decades to come.

Capable of producing between 600 RPMs and 3450 RPMs (depending on what the speed setting has been set to), you’ll be able to flush a tremendous amount of water through your system with the help of this pump – or dial things back a little bit to conserve on energy when you aren’t using the pool as regularly as you might have been during the middle of the summer.

Features

Installation with this particular pump is about as simple and as straightforward as it gets. There isn’t a lot to establishing this pump in your already existing aboveground or inground swimming pool, and most find the entire project to be as close to a “drop in” set up as possible.

On top of that, this pump is widely regarded as one of the most energy-efficient options money can buy. You won’t ever have to worry about this variable speed pump chewing through your electricity the way that some of the single speed pumps might.

Combine all of that with the legendary durability of this equipment – and everything from Hayward, really – and you’re looking at something special, certainly one of the best variable speed pool pumps on the market today.

Pros

  • Effortless installation
  • Nearly silent running
  • Durable and reliable
  • Efficiently moves a tremendous amount of water even on the lowest settings

Cons

  • Some circuitboard issues with older models
  • Does not feature “racecar” circulation speeds at the higher end

Pricing

As far as pricing is concerned, you’ll never feel like you are spending a mountain of money on this water pump for your pool. It isn’t exactly the least expensive option on the market today (but what industry leader is), but it isn’t going to break your bank account, either.

Customer Reviews

“I don’t think I’ll ever have to buy another swimming pool pump for the rest of my life”

“Near silent running, especially useful when entertaining or swimming at night”

“So energy efficient you’ll wonder if it is adding anything to your monthly electricity bills at all”

Final Verdict

This is a top-tier piece of technology across the board and certainly one of the best swimming pool pumps money can buy.

2.Pentair 011018 IntelliFlo

Another top-flight option and certainly one of the best variable speed pool pumps you could find on the market today, this particular choice is a 3 hp motor with plenty of “juice” to move an almost unbelievable amount of water without breaking a sweat or bogging down.

It certainly doesn’t hurt that this model is 100% certified by Energy Star. This should give you the confidence to run this variable speed pump all summer long without worrying about spending as much on your electricity bill as you did to install your entire swimming pool in the first place!

Features

Eight different programmable speeds allow you to fine-tune this variable speed pump to your exact specifications, determining exactly how much water this system circulates that anyone particular point in time so that you can effortlessly maintain your pool all year round.

The durability of this system is second to none as well thanks to the fact that it leverages the latest and greatest, technology, and hardware to bring variable speed pumping power to you for a relatively low initial investment. You’ll get years and years of use out of this pool pump for sure.

Pros

  • Near silent, even when running at higher speeds
  • Eight different pre-programmable speed settings for fine tuning
  • LCD control/display module is easy to use and intuitive
  • Skyhigh efficiency rating

Cons

  • Initial installation instructions can be a little bit confusing at times
  • Low-power speeds are a little bit louder than higher power speeds

Pricing

As far as pricing is concerned, this particular model is really “middle of the pack” compared to other pool pumps while offering a lot more in the dependability, reliability, efficiency, and performance departments. You won’t ever feel like this was a bad bargain.

Customer Reviews

“Set it and forget it capabilities that I appreciate during the heat of summer”

“Top-tier construction materials show this will work for years to come”

“Almost completely silent operation is so much nicer than high-speed pumps that really scream at the top end”

Final Verdict

You’ll never feel disappointed with this quality pump, especially since it offers eight variable speed settings, skyhigh efficiency ratings, and the ability to move a tremendous amount of water with near silent operation going forward.

3.Pentair 342001 SuperFlo

If you are sick and tired of having to regularly upgrade your swimming pool pump every couple of seasons and want something really dependable – REALLY dependable – then you need look no further than this particular option.

Simple and straightforward to install, this three speed swimming pool pump is going to give you plenty of power, plenty of efficiency, and plenty of dependability for years and years to come without ever threatening to put a dent in your bank account.

Features

One of the coolest features of this particular model is that it includes a self priming system that eliminates any potential for air to get into the pump while drawing water, even if the source of water is tremendously lower than the pump itself.

This illuminates a lot of the headache and hassle you might have had to deal with a lot of other pumps but it also extends durability of this system significantly compared to the rest of the pack.

On top of that, this pump includes a “built-in memory” that guarantees that even if the power to this pump is somehow shut off or interrupted it will still reboot with all of the settings that you had already preprogrammed maintained. You won’t have to worry about going back and reconfiguring everything and hoping that you got it exactly the way you had it before.

Pros

  • Self-priming functionality guarantees that there’s no air causing backfires in this system
  • Pump memory promises that you won’t have to reconfigure your system in the event of a power outage or interruption
  • Super energy-efficient and capable of moving water through multiple speeds

Cons

Only has three speeds compared to other options

Pricing

Compared to the rest of the pack, this particular option is actually significantly less expensive – by a couple of hundred dollars. The fact that you’re able to get your hands on a top-flight variable speed pump like this one for so much less than competing options isn’t something to take lightly, especially if you don’t want to spend a mountain of money on this kind of component going forward.

Customer Reviews

“Installation was almost effortless even though I hadn’t ever installed a swimming pool pump before”

“I had this pump running at 1400 RPMs and couldn’t hear a thing. This is such a huge difference compared to my older pump, and it circulates way more water as well”

“I don’t feel like I am wasting a pile of money every month on energy bills running this system at its highest speed thanks to its Energy Star certification”

Final Verdict

All things considered, this is easily one of the best variable speed pool pumps money can buy – and it also happens to be considerably less expensive than many of the other top options out there on the market today. Strong, durable, and nearly silent you just can’t go wrong pulling the trigger on this purchase.

Closing Thoughts

Each of the three top pumps that we highlighted above are well worthy of consideration and all of them are going to provide you a skyhigh return on your hard earned money should you choose them as your next pump system.

There are a lot of different things you want to think about before you decide which one is best for you (how much you want to spend, what features you’re most interested in, how important durability and reliability is, etc.) but each of these options are so similar to one another that it really feels like you can’t make a wrong decision.

How to Repair Your Pool Pump By Yourself

pool pump repair

Repairing your pool pump

Pool pumps will have problems in due course of time. It is not a matter of if but when and the severity of the problem varies. Over a dozen issues can be resolved. Others may warrant a pool pump replacement. Unless a pool pump is beyond repair, you do not have to consider a new one. It is also not necessary to hire a specialist every time your pool pump has a problem.

Before you can figure out how to repair a pool pump, you must know the model well and you should have a clear understanding of the issue. Some issues can be fixed easily. Others need more elaborate effort and a few tools. You may have a noisy pump, there may be a leak, the pump may not start, there could be air in the pool pump, the pump may get turned off abruptly, the flow rate may be low and the motor may hum but it might now start. These are very common issues with pool pumps. In this comprehensive guide about how to repair a pool pump, we select one issue at a time and illustrate the solution.

How to Fix a Noisy Pool Pump

Some pool pumps are very quiet. Most make some noise. The noise should not trouble you, unless you have a very old model that is anyway loud. A noisy pool pump may not be an issue for everyone unless the sound is a symptom of an underlying problem. If you hear screeching noise and the pump sounds as if it has been loaded with rocks, if there is some kind of gargling sound and other weird noises, then you should take a closer look. Unusually loud and unpleasant sound is frustrating for you and the neighbors.

Noisy pool pumps make screeching or gargling sound when there is insufficient water. The suction lines may be malfunctioning or underperforming. A few suction lines may be closed. If the pump does not manage to get enough water, it will make sounds and the noise will only get more intense. You should check the skimmers if the suction lines are fine. The skimmers may be clogged. Get rid of the debris accumulated at the skimmers. Reassemble if needed. Powerful pumps for smaller pools tend to make noise. Choose an appropriate model. If none of these are an issue, then you may have worn out bearings in the pump. You should change them.

How to Fix a Pool Pump Leaking Water

More often than frequent, a leak is caused under the pump and it is due to a pressure imbalance. Check the o-ring of the impeller housing and the shaft seal. Replace the o-ring or the seal if either is cracked. You may have to replace both if they are worn out. You can easily get these seals and o-rings at your nearest hardware store. You may purchase them online. There are kits available these days that have all such essential parts. They do not cost much.

How to Fix a Pool Pump Basket not getting Filled with Water

An optimally functioning pool pump will not have this problem. If the basket is not getting filled with enough water then you need to prime the pool pump. Priming a pool pump is very easy. Turn off the power source. Disconnect the power line. Turn off the main drain side using the diverter valve. Turn the valve for air relief anticlockwise so existing pressure is relieved. This valve is on the filter. The pressure should read zero Use a pool filter gauge. Remove the lid, clean the debris in the basket, get a garden hose and fill the basket with water.

Put the lid back on and turn on the diverter valve. Reconnect the pump and turn on the power. The problem should be resolved. Wait for a minute or so to see if enough water is flowing without any obstruction in the strainer box. The water should smoothly come out. In case the water is not flowing smoothly or freely, repeat the whole process from the start. In some cases, the debris in the impeller and filter must be cleaned too.

How to Fix a Humming Pool Pump that won’t Start

This problem occurs when the impeller is loaded with debris. Most components of a pool pump can deal with or endure some debris, not a lot. Whenever you hear a humming sound and the pump won’t start, check the impeller and it is most likely due to the debris there. You must turn off the power and disconnect the pump before you check the impeller. The debris buildup basically blocks the impeller. This effectively disables the pump. You must have screwdrivers and the manual at hand to dismantle the pump and reassemble the unit after cleaning the debris. The impeller is in the housing of the pump. You must also remove the gasket to clean the debris.

How to Fix a Pool Pump Sucking in Air

A pool pump is an airtight machine. Any leak will let air in. The pump will actually suck air in and there will be a problem. One of the most common causes of such a leak is the lid. The lid should be properly closed and sealed. It is not possible to prime a pool pump if the lid is letting air in. After you are certain the lid is fine, you must check the valve stem. This often lets air in to the suction lines. You will have to proceed from one component to another as you reach further into the pump. There could be a leak at one or several places. Check the lid, then valve stem, the suction valves, the suction plumbing, o-rings and then gaskets. There may be visible leaks or cracks. You may find loose fittings or old parts. Some may have to be replaced. Others can be repaired. If you cannot locate the leak, use some shaving cream and spray or apply it on these parts. Look for a dimple as the cream gets drawn in to the leak or crack.

How to Fix a Pool Pump Motor that gets Turned Off

The pump may not start or it may stop running suddenly. Start with the power and ensure it is steadily available. Check the timer to ensure the pool pump is not preset to go off. If a pump has power and making a humming sound without starting then the issue is with the capacitor. It has gone bad. The capacitor is responsible to start the pump. It regulates the electricity. If the pump does not get the jolt of power then it will not start. Capacitors can be replaced. You may not be able to do this alone if you have not done it before. An old pump will not have much help if only the capacitor is replaced. The motor may have to be replaced as well.

Pumps getting turned on and starting to run but shutting down are also a common problem. The real issue in such cases is overheating. Try to operate the pool pump at night. See if you have the same problem. If not, then overheating is the only issue. You can then check the vents at the bottom of the motor. There should be no obstruction. The fans should work fine without any inhibition. If the vents are fine and so is the fan, then the motor or the pump may have to be replaced.

How to Fix Low Flow Rate in a Pool Pump

One of the most common causes of low flow rate is a blockage. If something is blocking the filter or the flow of the pool pump, then the rate will dip. Use the filter gauge to check the pressure. You must get a clean reading of over 10psi above the manufacturer specified pressure. You can check the filter and clean it. This may restore the flow rate. You can check the impeller and the basket for debris. It is better if you clean and maintains a pool pump from time to time to prevent the buildup of such debris. Low flow rate is often due to debris buildup. Since cleaning such debris requires taking the pump apart and then reassembling all housed components, many users do not want it to be a routine and this causes several avoidable problems.

Every manufacturer has a troubleshooting guide for users. Such guides usually illustrate all the solutions for common problems. You must read this guide and be familiar with your pool pump, well before you have any problem. New pool pumps should not have much of an issue if they are installed properly and if the right size, model and specs have been chosen. Old pumps can have quite a few problems and not all of them can be accurately predicted without knowing the exact condition. If this guide or the owner’s manual does not address the problem you are having, contact a pro and get the pump inspected.

Pool pumps will have problems in due course of time. It is not a matter of if but when and the severity of the problem varies. Over a dozen issues can be resolved. Others may warrant a pool pump replacement. Unless a pool pump is beyond repair, you do not have to consider a new one. It is also not necessary to hire a specialist every time your pool pump has a problem.

You do not have to hire a pro for pool pump repair if you have are familiar with the machine, its different components and their functions, the necessary tools and required time. You should be handy with a few handheld, manual and powered tools. You need to read the owner’s manual before you can diagnose a problem. You should have access to a hardware store, offline or online, to get the parts for repair. Sometimes a pool pump may be beyond repair or many of its parts might need replacement. You should act accordingly.

A pool pump serves an important purpose and it may be presumed to be a complicated machine. It is not as the innards are quite simple to understand. All you need is a bit of an introduction to the different parts and their functions. The exact design and hence shape and other specs of a pool pump varies depending on the manufacturer or brand and model. However, most designs have similar parts. The basic concept of a pool pump has remained the same for decades, albeit materials have improved and certain dated manufacturing techniques as well as design elements have been done away with. Whether you have a small pool pump or one that can churn out hundreds of gallons every minute, you will have the same basic components.

Different Parts of a Pool Pump

There are two major parts or sections of a pool pump. One is the outer structure. The other is the drivetrain. The outer structure is meant to keep the whole system together and ensure there is no leak. The drivetrain is tasked with pushing and pulling water, hence ensuring the pump serves its main purpose. Even if you do not intend to work on pool pump repair yourself and will hire a pro anyway, it is still better to be familiar with the machine and how it works. Familiarity with the parts and their functions will enable you to know if the technician is actually telling you the truth. You can avoid getting led to believe in something that is not the case. You can make informed decisions and save money.

The Housing

The housing is to a pool pump what a hull is to a ship. Everything inside the pump is in this housing. The housing is often made of high impact plastic composite. This type of material is called Noryl. It is not any specific material as the modified resins are used in various shapes and forms, also for distinct purposes. The housing is the outer casing that you can see and access without opening anything or disassembling the system. The housing contains everything from the motor to the impeller, diffuser to the seals. These may be installed into or onto the housing. The material is light yet resilient. The modified resins are rustproof and they can easily endure the unavoidable threats of rain, water pressure and heat.

Until the eighties, bronze and brass were commonly used materials for the housing. If you have a very old pool pump, then the housing is likely to be of bronze or brass. These two materials are very durable. They can stand the test of time. The only shortcoming of these materials is cost of maintenance. There is a need for smelting and forging when working with metals and alloys. These materials also make pumps heavier than what you can buy now. Working with heavier pumps is not easy, especially when you have to move them. Fortunately, you may have a modern pool pump, which is much less costly to maintain.

Lid

This is also known as strainer lid. It serves as the primary inspection point. You can easily find out if the system is working fine by studying the strainer lid. If you do not see water or air bubbles in the lid as the pump is functioning, then you may have a leak. The air leak is usually caused at the side of the suction. The strainer lid is usually tinted or clear glass so you can inspect the system. The glass may be Lexan. It is what bulletproof windows are made of.

Strainer Basket

This is often referred to as the basket. The purpose of this strainer basket is to collect debris. The debris is prevented from reaching other components in the drivetrain. The strainer basket is capable of collecting hard debris, such as pebbles. It is not uncommon for pebbles to find their way into the pool pump and these can chip the impeller.

Gaskets & Seals

There are several gaskets and seals in a pool pump. The purpose of these parts is to keep the water moving and the equipment pad dry. You should not use a pool pump that has degraded or worn out gaskets and seals. Bad gaskets can cause air leak. There will be more air inside the pump than water. You should always inspect the seals and gaskets whenever you open the housing for pool pump repair, even if the problem lies elsewhere. It is possible to be proactive with pool pump repair when it comes to seals and gaskets.

There are four types of seals and gaskets in a pool pump. The lid gasket is just under or on the lid, or strainer lid. A gasket is installed at the cone tip of the pump diffuser. This is known as diffuser kit. There is a housing gasket. This is the largest of all. It is in the main housing, usually at the motor seal plate. It is also referred to as seal plate gasket. The fourth is shaft seal. This seal has two sides. It is on the motor shaft under the impeller. In terms of importance, the shaft seal is the topmost priority as it can regulate surging water and thus prevent it from running into the motor. This can cause fatal damage and effectively render the pool pump unusable.

Seal Plate

This is the mounting flange of the motor in your pool pump. This secures the motor inside the housing. The part is so named since it has the shaft seal enclosing the motor shaft that prevents water leaking into the pump motor. The seal plate is usually made of the same material as the housing. If the housing is made of Noryl composite or plastic then the seal plate may also be of the same material. The seal plate has to be just as strong as the housing and light too.

The Drive Train

Motor

The drive train is the most important functioning or operating part of a pool pump. The housing is just as important as it keeps everything together and enables the functioning of all parts. But it is the drive train that actually does all the work. The motor is the force that operates the pump, providing the thrust to pump water. Older pool pumps used to have single speed inductor motors. Contemporary pool pumps have dual or variable speed motors. These are more eco friendly and consume less energy. Older motors rely on dual voltage and can operate on 115 or 230 volts. Dual speed and variable speed motors operate on 230 volts. A few models are available that can operate on 115 volts, despite being dual or variable speed.

Impeller

The impeller does the actual work of circulating water. It has two or more discs that are glued together and these are assembled with veins, also known as fan blades. The impeller uses the spinning shaft of the pump motor and transforms it into a force that pulls the water and effectively circulates it. Most models have two discs for an impeller. The impeller pulls the water through a porthole and along the suction pipe onto the pool.

Diffuser

Diffuser is an accessory for the impeller. It is an essential component. The job of a diffuser is to amplify the force created by the impeller. The pull or suction is enhances using a vacuum lock. This is at the front housing and tightly enclosed. The diffuser is usually a cone or funnel. It is sealed using a diffuser gasket. The diffuser complements the impeller. The spinning impeller creates the turbulent energy that is then concentrated and directed by the diffuser towards the suction pipe.

Impeller Ring

Impeller ring is also known as wear ring. It is usually made of plastic. It is installed at the tip of an impeller. The objective of the wear or impeller ring is to serve as an extension of the tip. This ensures there is a seal between the diffuser and impeller. The impeller creates centrifugal force and this compels the ring to be sealed even more effectively so the vacuum is more efficient at priming the pump and actual pumping of the water. Base models or small pool pumps may not have an impeller ring. High-pressure pumps will have this component. There is another accessory, the impeller screw, but most modern pool pumps do not have this anymore. Manufacturers use external thread motor shafts instead of relying on an additional screw.

The Best Intex Pool Pumps To Buy in 2019

best intex pool pump

How to pick the Best Intex Pool Pump

Whether above ground or in-ground, a pool is considered to be a significant investment. Every pool owner might, therefore, want to take some time to keep their pool in perfect condition. The best way to save money on pool maintenance is by keeping the pool water clean, and on the same note, the best tool to achieve this is an intex pool pump. A pool filter on its own cannot do much, this is why getting the right kind of pump is crucial. The design of an intex pump is what determines if the water in your pool will be clean circulating water or dirty stagnant water. Different models of intex pool pumps feature the pump’s motor, the filter pump and other accessories that we are going to look at in the list below.

1.      Intex Krystal clear sand filter pump for above ground pools

With a rating of 4.5 stars, rated by more than 3,000 pool owners, it is obvious that this intex pool pump’s category is in the big leagues. It combines both quality and affordability, making it an unbeatable customer selection, which is reflected by the number of thumbs up it has attracted. It is the most ideal gadget for above ground pools. It is designed with an average flow rate of 2,450 GPH or 41GPM. That is just an average, the actual flow rate of this device can go up to 3,000GPH. With a total voltage of between 110-120v, this intex pump is equipped with a safety feature referred to as the Ground Circuit fault Interrupter with automatically cuts the power flow to the system to completely stop the electric current whenever it senses an abnormality or malfunction of the system. With this kind of sensor and safety features, this makes the Intex Krystal Clear Sand Filter the best choice for regular service pool.

In addition, this device is equipped with a sand filtration tout. The purpose of the sand is to refresh and soften the pool water while preventing the formation of algae in the water to keep it properly sanitized and replenished. The pump comes with a total of 6 different setting modes which include backwashing, filtering, and rinsing. The other three modes include recirculation, drainage and system closure, and they are the last ones in operation. These operations are automatic and function strictly in that order. The motor has a power of 0.95hp.

Pros:

  • The system comes with a 24-hour timer which allows the owner to set the period in which the pump will be in operation.
  • The pump requires very little maintenance and unlike any other filtering gadget, you only need to replace it every 5 years when it’s really necessary.
  • The model has a versatile design for universal use. It can be used for pools with a minimum diameter of 16 feet.

Cons:

  • The weight of the sand increases the overall weight of the device, making this pump relatively heavier than others in its category.

2.      Intex Krystal Clear cartridge filter Pump design for above ground pools

The intex cartridge filter is a powerful above pool pump with a voltage power of 110-120v. It comes with a very reliable cartridge filter that requires little or no maintenance. The cartridge can be replaced every 2 weeks in case the user deems fit but this is not really necessary. You can choose to simply clean it and reuse it again and again. The cartridge categorizes as type b, is the only accessory of this 2,500GPH filter pump that needs occasional replacement. The cartridge filter pump is equipped with a valve at the bottom of the filtration chamber that flushes out debris, making the pump a very user-friendly device that is easy to maintain. The chamber has another automatic chamber that releases trapped air to avoid access pressure inside the machine. The pump is also very portable featuring a lightweight design of less than 23lb.

Pros:

  • The device is universal and can be used in any above ground intex pool with less than 25-foot diameter
  • The pump is equipped with a Ground Circuit Fault Interrupter, a very quick and a sensitive circuit breaker that cuts off the electric current whenever it senses an abnormality in the machine to avoid unforeseen incidents.

Cons:

  • The pump usage is limited to swimming pools that have a metal frame only.

3.      Intex 28681EG 120V 16 Inch Krystal Clear Sand Filter Pump and Saltwater System

With a 16-inch diameter tank, the 28681EG Sand filter and the Saltwater system is capable of holding up to 100lbs of sand at a go. It also has a power capacity of 120v with a saltwater system that further contributes to clearer, sparkling and clean water. The flow rate of the saltwater system is 2,200GPH with the sand filter pump sucking in the water at a rate of 2,650GPH. Just like any other Intex pump system in this category, the 28681EG also has a safety feature readily armed with the Ground fault Circuit interrupter that will stop the flow of electric current immediately there is a glitch in the machine’s operation.

Pros:

  • Uses Salt in the Place of Chlorine. Using salt to sanitize water instead of chlorine will still bear the same results but with fewer effects on the human body and the surrounding ecosystem. The saltwater system is also easy to maintain and user-friendly. Chlorine has very adverse allergic effects on some sensitive skins.
  • Saltwater is the most favorable for piping. Saltwater system treatment purifies water that is not only very safe on all types of human body skins, but also safe for all metallic frames of the pool and does not cause corrosion to the metal piping, unlike chlorinated water. The piping system, therefore, gets an extended life span.

Cons:

  • The pump’s usage is limited only to pools that have a water capacity of 15,000 gallons.

4.      Intex 28635EG Krystal Clear Cartridge filter pump for above ground pools

This cartridge pool filter pump with a capacity of 1,500 gallons suited for a number of above ground pools ranging between 16 and 18 feet diameter. While operating on standard household current, this filter pump offers the solution of a practical filter pump. Each cartridge will last up to two weeks when used regularly. At the bottom of the pump’s chamber, there is a valve to flush out sediments and debris from the unit. At the top of the unit, there is another valve the releases trapped air to avoid pressure building inside the unit, which could otherwise interfere with the smooth flow of water inside the unit. The pump comes in a slim and attractive design and is very effective in energy conservation.

Pros:

  • The pump’s impeller and motor bearing are properly lubricated for an extra quiet operation and do not dry up enhancing a smooth running throughout.
  • The unit also has double insulation to ensure that it maintains its quality feature even in the very cold or hot seasons. This is because the unit is designed with double insulation chambers so that the water does not freeze even when the machine is not in operation.

Cons:

  • If you are looking for a unit that is quick in operation, then this is not it. The 28635EG unit is meant for thorough filtering and cleaning, not quick operations.

Conclusion

Before settling on an intex pool pump, always ensure that the unit has a capacity to move enough water to appropriately match the size of your pool. It would also be helpful to note that sand filter pumps are more durable but are not very effective in energy conservation. The bottom line is, however, intex pool pumps are the best choice for any above ground pool. This is because the filtering system for an above ground pool pump is correctly paired with the appropriate horsepower by intex in all its products.

Best Intex Salt Water System Review- Pro’s & Con’s

intex saltwater system

Introduction to the Best Intex Salt Water System

Salt water pools are increasing in popularity but there is a majority of people who wonder whether a saltwater system is really necessary for their pools. It does not matter whether you are planning on building a new pool or converting your old one into a salt system, this article will take you through the importance of a saltwater system, some reviews of the highest rated models and a little information about one of the top-ranked saltwater system brands. Let’s start with the definition of a saltwater system

A saltwater system is a unit that uses electrolysis in the form of dissolved salts (NaCl) to form hypochlorous acid (HCIO) and sodium hypochlorite (NaCIO) which are the most commonly used sanitizing agents in most swimming pools. In modern swimming pools, chlorine generators are not a new thing, in fact, a chlorine generator can be considered to be the backbone of a saltwater pool or the unit that facilitates the functionality of the pool. Chlorine generators break the chemical bonds of the familiar salt molecules in the water as a way to sanitize water in the pool, a process that frees the chlorine molecules which in turn creates chlorine that sanitizes the pool water.

Why would you need a saltwater Chlorinator?

Saltwater swimming pools eliminate the need for purchasing, handling, transporting or storing dangerous chlorine products. Most people prefer saltwater pools because they are said to leave the skin feeling silky and smooth, unlike the irritating feeling that comes after a chemical bath. The chlorine generators carry out all the functions including managing, handling and storing chlorine for your pool’s requirements. The generators produce chlorine continually in your pool making it easier to maintain and manage proper sanitation in your pool. They also keep your pool free of algae and pathogens. Let us look at some of the bestselling saltwater systems from one of the leading brands.

1.      Intex Krystal Clear Saltwater System with E.C.O

This saltwater chlorinator model features a unique two-stage advanced technology to sanitize your pool water. It provides an optimal sanitation method for cleaning your pool’s water while at the same time replacing the dangerous packaged chlorine with alternative safe natural pure salt. A very small amount of an all natural swimmer-safe chlorine is produced when natural salt is added to the pool water which then passes through a unique filtration process to produce fresh, soft and clean water that is less of all the harsh chemicals that would have otherwise been present. Through the filtration process, the water molecules are split to form very powerful oxidants that are used to effectively destroy the present contaminants such as algae and bacteria. Therefore, looking at the function of the Intex E.C.O saltwater system, it is correct to say that its combination of chlorine with other strong oxidants results in the safest and purest pool water that you can ever experience. The E.C.O process is so effective that the amount of chlorine needed and produced by the system is reduced by up to 60%.

Pros:

  • It comes with a 24-hour clock cycle
  • The installation process is quite easy
  • The integration of the salt and water is a one time process that does not have to be repeated

Cons:

  • For the system to function properly, you need to have a filter pump with a capacity flow rate of between 2,650 and 11,355 liters per hour.

2.      Intex Krystal Clear Saltwater System CG-28669 110-120v with GCFI

This system also combines a two-stage technology to sanitize the pool water. Firstly, an undetectable level of naturally occurring swimmer-safe chlorine is produced when you add natural salt to the pool. Ather this, the water is passed through a titanium electrolytic cell which is carried out during the filtration process. Once again, the result of this process is soft, pure and clean water that does not have the potential harsh side effects as seen with the use of packages pool sanitizing chemicals. Secondly, the water molecules are slip during the electrocatalytic oxidation process, making the molecules very powerful oxidants which completely destroy bacteria and algae and other contaminants. Another process that is unique to the Intex saltwater system is the provision of a unique benefit to the consumers that highlight an E.C.O process that is so effective that the amount of chlorine needed by the system is significantly reduced up to 60%. This system is one of the most innovative units available in the market today. It is a reasonable investment considering the benefits it presents and its relatively affordable price as compared to the prices and features of other systems in the same category.

Pros:

  • Cost effective even when in operation
  •  Features an innovative technology
  • Easy to install and operate

Cons:

  • It can only be used by above ground pools as it has a maximum capacity of 15,000 gallons of water.

–           

3.      Intex Krystal Clear 1500 GPH Sand Filter Pump and Saltwater system with E.C.O

This is another leading saltwater system from the Intex brand featuring E.C.O. it is a very versatile pump that can be used in pools with a water capacity ranging between 2,600 gallons to 8,500 gallons. To facilitate an easy installation process, please note that the system runs on a 110v-120v power supply which is standard in most systems, as you will realize. The system also has very well developed safety features with an additional 2 years of manufacturer’s warranty. This shows that even the manufacturer has great faith in this system meaning that there is a lot of engineering and time invested in this system to ensure safety, reliability, effectiveness, and durability. It also comes with an instructional DVD besides the user manual to further simplify the installation process. The package also includes everything that you will need during installation so that it is done and ready for use within a short time.

Pros:

  • Comes with a 2-year manufacturer’s warranty
  • Comes with everything you need to facilitate the installation process
  • Keeps your pool clean and pleasant to use

Cons:

  • Can only function is it has pool sand.

Things to consider when choosing the best saltwater system

Choosing a saltwater system or a chlorinator should be done with a lot of keenness to ensure that you enjoy your swimming time in clear, hygienic and safe water all year round. The following are some of the factors that should be utmost considered before purchasing one

The cost: This goes without saying. Your budget is the primary determinant of the quality of the system you will get. This applies to every product not only chlorinators.

The size: My personal recommendation on this factor is that you get a system that is rated slightly larger than your pool size requirement. The reason for this is if you get an exact match or one that is smaller, it will be forced to overwork in order to produce an adequate amount of chlorine for your pool especially for pools that service a lot of people regularly. But if you were to get a larger system, all you have to do is to back dial a little bit to get the desired rate of performance and it cannot malfunction due to overworking.

The Reverse polarity

This means that as one side is producing chlorine, the other side is being cleaned and after a little while, the roles switch so that both sides are used and cleaned at equal intervals. Although this should be a consideration while you are purchasing your system, this does not overwrite the need to regularly clean your system. Cleaning should be done normally, just not as often.

The manual test: If you would like to know the salinity of the water in your pool, there are three tests that you should carry out. A system test, a manual test and taking a sample of your pool water to the local pool store for a proper analysis. These three tests are mandatory before purchasing a new saltwater system so that you do not get a defective unit.

Pentair 011018 Review- Pro’s & Con’s

pentair intelliflo

Introduction to the Pentair 011018

Why would you want a Pentair Intelliflo pool pump? Well, the answer is quite straight forward. This pump series has an extraordinary energy conservation feature that will drastically save you a significant amount of utility bills money. It is enhanced with 8 different speed modes which give you the optimal speed control enabling you to determine the right amount of water flow depending on your preferences. The speeds range between 400 to 3,450 RMS.

Pentair Intelliflo pool pumps brought variable speed technology into the market long before any other manufacturer did. But, a leader should never stand still, they, therefore, did not stop there, instead, they have continued to revolutionize their products making the intelliflo series better than ever before. To accomplish this, they have perfected the intellifo pumps ultra-efficient, permanent magnetic motors, just the way they are used in high-end hybrid cars. The advantages of these pool pumps include precisely matching the motor speeds to your pool’s requirements, featuring a totally enclosed fan-cooled motor which prolongs its life significantly, a built-in diagnostic protector that further extends the lifetime of the motor and a very quiet operating system. In this article, we are going to look at some of the bestselling and highest ranked intelliflo pool pumps models from the Pentair brand.

1.      Pentair Intelliflo 011018 VSF

This model leads the ways featuring a permanent magnetic motor for better performance. It also the most energy efficient unit in the family history, fully compatible with Intellitouch, Easy Touch and Suntouch control systems, providing a wide range of options from indoor control systems to wireless controls that effectively manage the heating system of the pool, spa jets, lighting, water features among others. To get an even better control option, you can opt for an additional screen logic interface to your already automated system that allows you to control your pool from literally anywhere you are, anytime simply by using your smartphone, mobile digital device or computer. The pump also features a very easy installation process for inground pools and spas, either new ones or existing ones, all sizes and types.  

Pros:

  • Offers a better efficiency thanks to the permanent magnetic motor
  • Excellent energy conservation feature
  • A proven in-field reliability of nearly a decade long
  • Comes with exclusive digital software controls that make the programming of the pump a cinch.
  • The installation process of the pump for in-ground pools, spa, and pool combos and any other area is very easy.

Cons:

  • The model is quite expensive
  • The installation process although easy might be time-consuming especially for users who are new to products from Pentair.

2.      Pentair Intelliflo VS+SVRS 011018

This pool pump is another model from Pentair’s intelliflo series that features a smart technology that automatically shuts off whenever it detects a possible drain blockage. It is also programmable to function at different speeds during different operations including heating, spa jets, filtering, cleaning, water filtering among others in order to slash the water expenditures by up to 10%. The built-in diagnostic protector prevents damage to the motor due to natural occurrences such as freezing, overheating and voltage irregularities The SVRS model also features self-priming technology. Safety on this model is enhanced by the safety lockout feature that comes with password protection prevents any unauthorized person from changing the speed of the pump. It is also equipped with different speed setting that allows the user to set minimum and maximum speeds so that the unit only operates within the set ranges to ensure safety and a lond=ger lifetime of the pump. The SVRS model is fully compatible with other Pentair controls and automation and other digital gadgets that manage the heating, lighting, spa jets, and other water features.

Pros:

  • Comes with a safety lockout feature that prevents unauthorized people from changing the pup settings
  • The is an LED display that shows when the SVRS mode is activated
  • It comes with different function buttons that set the speeds for various operations such as the filtration cycles, cleaners, spas, and water features
  • The unit also has an alarm status light that notifies you in case there are issues that might need urgent attention
  • It also comes with a quick cleaning button that is used for backwashing or vacuum cycles
  • The time out button allows you to interrupt the set schedule any time, for a certain period which you can also specify.

Cons:

  • The unit is very expensive
  • Its operation is not totally quiet

3.     Pentair  Intelliflo I1 and 12 011018 Variable speed pool pump

For pools that are located in areas where there is a restriction of the replacement flow rates, this intelliflo i1 pool pump might be the right pick for in-ground pools in such areas. It comes with a hydraulic system that significantly minimizes the flow rate while at the same time providing an energy saving feature that you would expect from any Pentair valuable speed pool pump. It also has a maximum rating of 7 amps, making retrofits easier in the application and limited by the size of the existing wire gauge. This unit is hydraulically engineered for maximum functionality on the 15 amp breaker. It is a one in all unit featuring energy efficiency, ready automation, and advancement in technology, making it the ultimate smart choice. It is also equipped with a permanent magnetic motor that runs on cool, producing fewer vibrations as compared to induction motors. It also has an inbuilt diagnostic that protects the motor against risks that might cause premature wearing, loss of prime, freezing, overheating, and any voltage irregularity giving the pump longer service life. The pump effectively improves the functions of automated chlorinators and other chemical dispensers because the internal water moves slower and for a longer period.

Pros:

  • Heavy duty and durable construction technique for a prolonged lifetime
  • Comes with an enclosed fan that protects the motor against natural weather elements
  • Has a built-in diagnostic that detects dangers that may cause the motor to malfunction
  • Significantly improves the function of automatic chlorinators and chemical dispensers
  • Comes in a versatile hydraulic design that reduces the water flow rate so that it can provide a significant energy saving feature.
  • Its keypad can be rotated for easier accessibility with an optional wall mount kit sold separately

Cons:

  • The unit is very expensive
  • Installation of the pump is very complicated
  • The motor is a bit noisy while in operation.

What to look for when purchasing a new pool pump

It is always advisable to do a little homework before investing your money in any device, especially if you want it to serve you for a long time. There are many factors that need a lot of consideration before you start looking for a pump for your pool. These include the energy rating of the pump, the size, noise, and its functionality. Other key factors include:

  • The volume of your pool/spa: The quantity of water in your pool start at the water turnover to the length of time it takes to move all the water in your pool. This means that before settling for a certain pump model, the volume of your pool is one of the most critical measurements that you need to have at your fingertips.
  • Plumbing: You should also be aware of the layout of your pool plumbing, the distances, and other installed units.
  • The efficiency of the pump: Pumps are notorious for consuming up to 70% of the total energy cost of running the pool. Therefore, make sure to look for a pump that is energy efficient so that you can save on the energy utility bills.
  • Operational noise: This is also another factor than most people overlook. Look for a pump that runs quietly so that you run it during off-peak hours when electricity is a bit cheaper.